News

Ark Survival Evolved: How To Create An Irrigation System

Farming is one way to sustain yourself and your tamed creatures in Ark: Survival Evolved, but to make life easier on yourself you should build an irrigation system. They can be quite tricky to put together, as there are multiple pieces and parts that must be placed in order for them to work properly. You should also keep in mind that having your base upgraded is the first priority, as this pipeline will lead any opponents directly to your base.

There are quite a few tips and tricks to keep in mind when building this and it can prevent you from obtaining a headache down the road. You might be tempted to give up on your irrigation system in Ark: Survival Evolved, but you should persevere as it will be well worth it for you in the end.

3 Acquire The Necessary Materials

You will need stone, stone, and more stone in order to craft the pieces you need. The fastest way to collect stone is to craft yourself a hatchet, but the most efficient would be to tame a Doedicurus.

It is also a good idea to take a tamed creature with you who can carry a lot of weight so you can pass off your own stone gatherings onto them. If you are trying to create an irrigation system early on then you might find yourself encumbered after a short time, which can be tedious.

There is a metal irrigation system, but you should start with stone to make sure you can accomplish it before using harder-to-find materials.  It is a good idea to upgrade later on to metal, especially if your pipe spans across a large distance, as it can be a pain to check every piece if a creature or other player, depending on your server, happens to break it.

The irrigation pieces you can craft include:

  • Flexible
  • Inclined
  • Intake
  • Intersection
  • Straight
  • Tap
  • Vertical
  • Water Reservoir

2 Place Your Intake Pipe

The first step is to place your Intake Pipe, but there are a few things to keep in mind before doing this. You need to make sure that it sits directly in the water and it works best if the pipe does not clip through the ground. This can interrupt the water supply and make it more difficult to complete the system.

Thie Intake Pipe can be placed in any water source, which includes:

  • Ocean
  • Ponds
  • Streams

There is no rule that says you have to start at the water source, and this is entirely dependent upon your base location. It might be easier for you to start at your base and place all of the pipes how you want them, while those who struggle with placing an Intake Pipe might prefer to begin at the water.

An Alternative Is To Use A Water Reservoir

If you don’t feel like connecting your pipes directly to a water source for whatever reason, then you can use a Water Reservoir instead. These will fill up when it rains, or if you place a water-carrying item inside such as a Waterskin, Canteen, or Water Jar, depending upon your current Engrams. This is not great for the long-term watering of plants, but if it is just for drinking water then this might be your best option.

Connecting Pipes

Next, you need to connect your pipes to the Intake Pipe, and most players, especially beginners, will find that an Inclined Pipe will have to be used first. This is so your pipeline doesn’t end up tucked into the ground where you won’t be able to add onto it.

Once you place your pipe you will see the color change from ghost green to a solid blue. This means that water is flowing through your system so when it does finally reach your crops you will have water on hand for them.

Splitting Your Source

If you decide that you want your pipe to head in multiple directions and water various crop plots, then you need to add an Intersection. This will add a cross-section of the pipe so you can take water in three different directions.

You might consider adding this in your first design, usually when you are still trying to survive your first days, as you will probably want to expand. It is always easier to do it the first time around, rather than go back and try to mess with it to make it work.

1 Place Taps Strategically

The water will flow freely from your pipeline once you add a Tap, which is just a giant square that releases water out of two of its sides. The good news is that it can irrigate several plots at once, so placing them in an optimal position makes it so you don’t have to fidget with more pipe and taps.

Add A Tap At Your Door

Players often don’t consider the repercussions of moving further inland when it comes to how they can acquire water. It is smart to add a tap right outside the door to your main base, or even add a line inside.

The pipes can go through walls, which makes it really easy to add this aspect to your base. There is really no reason why you shouldn’t do it as water is a necessity of life. One thing to know before starting is that you can always refill your water-carrying item at the taps by your crops, or drink straight from the crop taps. However, if you have a complicated irrigation design it might be easier to just have one inside.

Next: ARK Survival Evolved: 10 Most Important Character Stats To Upgrade, Ranked

  • Guides
  • Ark: Survival Evolved

Rebecca O’Neill is a reader and writer based in Ohio, near the heart of the CLE. She enjoys playing a wide variety of video games and spending time with her husband and son when she’s not writing.

Source: Read Full Article